(as of Aug 09,2021 07:04:28 UTC – Particulars)
Unassembled DIY Model, Want consumer to assemble the Complete set
Flight Management: KK Flight Management
Motor: 2212 1000kv 3-4s
ESC: 30A 2-4S 5V3A BEC
Battery: 3S 11.1V 3300mah 25C T-type plug lipo
Distant management: T8FB with receiver
1* F550 Hexa-Rotor Air Body Package
6*A2212 1000KV 13T Brushless Outrunner Motor
6* 30A Brushless ESC
3* pait of 10×4.5in 3K Carbon Fiber CW CCW CF Propeller
1*KK Multicopter V2.3 Circuit board Flight Controller V5.5
1* Carbon Fiber T Kind Fast Set up Tall Touchdown Gear Skid
1* set of 3D Print PLA F550 6-axis Touchdown Skid Mounting Adapter
1* 11.1V 25C 3300mah lipo battery (Non-obligatory)
1* Radiolink T8FB 2.4GHz 8Ch RC Transmitter and R8EH Receiver (Non-obligatory)
1. Don’t modify any parameters and wiring with out realizing the flight management and distant management.
2. The product is already welded, you solely have to assemble it, and bind the receiver with transmitter, then may fly.
3. Don’t cost the battery when you find yourself not at dwelling. Don’t cost the battery instantly after flying. Don’t over-discharge the battery. (Over-discharge might trigger the battery to be charged and change into out of date.) If the battery is totally charged, it is probably not charged for a very long time.
4. Activate the distant management earlier than powering the plane. After the flight is over, unplug the ability provide and switch off the distant management to forestall accidents.
5. You may fly it on open area when there is no such thing as a wind, don’t fly within the crowd and surrounding areas with interference.
7. If the shopper must assemble, we’ll give an inexpensive citation for extra logistics freight and technical meeting charges.
8. This product just isn’t a toy and isn’t appropriate for youngsters underneath 14 years previous.
9.In case you are a newbie, it is strongly recommended to be assisted by skilled adults.
Extra wheelbase flight is extra steady. FrameWheel F550 (Discover Not Made by DJI) is a multi-rotor designed for all pilots for enjoyable or AP, it might probably obtain hovering, cruising, even rolling and different flight components.
Outfitted with Carbon Fiber T Kind Fast Set up Tall Touchdown Gear Skid, Gimbal might be mounted on the rack.
It may be utilized for leisure, aerial pictures, FPV and different aeromodelling actions.New design PCB board speical for F550,assist customary 50mm controller board like MK,KK, FF,MWC.
This combo we offer KKmulticopter 2012 flight controller with 2.3 firmware,it can also suprisingly have this impact.
Welding and debugging earlier than cargo.